We also need to pay attention to the information selection of electric kettle. Now there are all kinds of materials on the market. We can choose some materials that are not harmful to human body, and we must buy some materials that look very good and are relatively solid. If there is a problem, it will be a lot of trouble for us to buy them later, so we should It's still very good to buy some brand-name products, such as the electric kettle of Midea. After all, it's a big brand, and the later maintenance is guaranteed. Even if the price is higher, it's also very good to use.

Electric kettle, we should go to some regular small home appliance manufacturers for purchase, after all, these manufacturers have anti-counterfeiting signs, and the quality is guaranteed. Even if the price is higher, we can also live a safer life. It is said that diseases come from the mouth. If the information of electric kettle is not good, when we boil water, leeches will change, which will make our life There are some problems. No matter how expensive the electric kettle is, it won't be too expensive. We can't be greedy for small and cheap. We can save these small money, and then there will be big problems.

The indicator light is on, indicating that the power supply has participated in the indicator light circuit. The fault lies in the electric heating pipe or its connecting part. Common electric heating pipes are damaged and touch poorly. Remove the electric heating pipe and measure its resistance value. The electric heating pipe is damaged and can only be replaced. The poor touch is mainly due to the severe corrosion or deformation of the touch reed in the power plug assembly. The switch box can be disassembled for repair, and the severely damaged reed can be replaced easily.

The trouble of small home appliance manufacturers is often caused by the power supply not participating in the electric heating tube circuit. During maintenance, first measure the resistance of the 3-core plug L and N on the power line of the base with the multimeter R × 10. Normally, when the reset switch is not pressed, the resistance is ∞, when the button is pressed, the corresponding resistance of the 1500W electric kettle is about 32 Ω.

If the resistance is still ∞ after pressing the button, it means that the heating tube circuit is not working. At this moment, the resistance of the two ends of the 3-core plug N and l of the pot body can be measured again, and the normal value is the same as above. If the measured results are normal, it is indicated that the fault is in the base part. Check whether the connection between the power line and the base socket is open circuit or bad touch. The base structure is simple, and the fault can be found soon.

Article source: silicone folding kettle manufacturerhttp://www.jinleidj.com/