Electric water bottle is very popular because of its easy to use and convenience. It is used by ordinary families. However, do you have the right way to use it? Is your maintenance method appropriate? Here's how to maintain the electric water bottle:

The key to the application of electric water bottle is that the water bottle should be placed flat. Avoid uneven heating. Because the general electric water bottle is made of plastic shell, it should not be placed near the heat source such as stove and all kinds of inflammable gas, otherwise, it will be burnt out and its appearance will be affected.

Pay attention to the water volume in the bottle at any time. The water level shall not be lower than the low water level to avoid burning the heating pipe. Together, it should not be higher than the high water level to avoid water overflowing out of the bottle when it is jubilant. Do not use an electric water bottle to boil any food or drink other than water. Try not to put more than 65 degrees of hot water.

Do not heat or dry objects with electric water bottles.

Try not to use multi-purpose socket, but use wall fixed socket. The rated current value of the socket shall be greater than that of the electric water bottle, and reliable power ground wiring is required. When adding water, do not take it directly to the tap for injection, to avoid the moisture of the electrical part. Do not touch the thermos with wet hands.

When it is not used for a long time, the plug shall be pulled out and the maintenance work shall be done well. Do not immerse the water bottle or wash it with water. The key to the maintenance of the electric water bottle: clean the inner tank regularly to avoid the accumulation of dirt in the water and the influence of heating elements on the heating power.

When cleaning the tank, screw off the drain cover at the lower part of the bottle to drain the water in the tank, and pour lemon juice or white vinegar and water into the bottle until the high water level stops. Power on for about an hour, then press the water out key to output all water. Add cold water again and repeat until the lemon smell disappears.

When cleaning the bottle, first unplug the power plug and wipe the water bottle with a clean wet cloth. Do not immerse the water bottle or wash it with water.

Article source: silicone folding kettle manufacturerhttp://www.jinleidj.com/