1. Water leakage

In use, it is found that the electric water bottle is leaking suddenly. If it is found that the electric water bottle is leaking, first find out the cause of the leakage, then check the leaking area and try to find out the problem. Generally speaking, the leakage of the electric water bottle is probably due to the loose connection of the silicone rubber pipe, or the crack. We just need to plug it from the beginning and tie it up. Of course, if the silicone rubber tube is seriously worn, corresponding repair or replacement parts can be made according to the condition.

2. No heat preservation

First of all, check whether the terminals of each plug-in of its insulation circuit are loose. If there is any part broken here, we can replace the broken one directly, so that we can check it gradually, and the fault can be easily removed.

3. No heating

Connect the electric water bottle to the power supply and turn on the switch. It is found that the electric water bottle is not heated and the water source is always cold. How to deal with the repair problem of the electric water bottle.

Turn off the power first, and then check the plug and plug plate of the electric water bottle. It is weak and has poor contact. It can be polished with sandpaper, and then check whether the fault is eliminated. If it can operate normally, it can.

If there is no problem with the plug and it is still not heated, it may be that the over temperature fuse is damaged. Use the universal meter to find out the specific reason, and then carry out the corresponding repair.

4. The indicator light is on, and the electric water bottle does not come out

When using the electric water bottle, it is found that it can operate normally, that is, there is no hot water supply. First, confirm that it is not a power problem, and continue to check other problems. Let's first check whether the water outlet switch is in poor contact, and then check whether the rectifier diode vd1-vd4 is in open circuit.

If all above are normal, check whether the voltage is normal with the universal meter. If the voltage is normal, focus on the motor. If the voltage is 4-5v, it should be motor fault. Consider the actual situation and carry out corresponding repair or maintenance.

Article source: silicone folding kettle manufacturerhttp://www.jinleidj.com/